STRUČNI SAVJET
od 9 do 17 sati
Nema proizvoda
Besplatna dostava! Dostava
0,00 € Ukupno
Proizvod je uspješno dodan u vašu košaricu
( kom)
Kupite za više i isporuka koju imate besplatno.
*329 603
WISEFAB rear track kit for Subaru Impreza
Impreza is good performance car designed for rally. Because it’s good performance it is more and more used for circuit racing. On asphalt the ride height doesn’t have to be as high as on gravel. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. If kinematics is bad, then it decreases mechanical grip and also influenses aerodynamical grip as kinematics supports less roll squat and pitch. The Wisefab kit would bring the RC, bumpsteer, anti-squat and camber curve back to normal range, providing better roll stiffness, better handling and grip.
Novi proizvod
1.448,20 € s PDV-om
Privremeno nedostupno
U Skladištu: 0 kom
Nažalost, proizvod je privremeno nedostupan. Molimo odaberite drugi.
Za automatsko obavještavanje o dostupnosti proizvoda,
klik na "Obavijesti nakon dostupnosti proizvoda".
klik na "Obavijesti nakon dostupnosti proizvoda".
WFGD4
Preporučeni proizvodi
Impreza is good performance car designed for rally. Because it’s good performance it is more and more used for circuit racing. On asphalt the ride height doesn’t have to be as high as on gravel. Lowering the car would give more grip and better handling, but then the factory designed kinematics wouldn’t work as it supposed to. If kinematics is bad, then it decreases mechanical grip and also influenses aerodynamical grip as kinematics supports less roll squat and pitch. The Wisefab kit would bring the RC, bumpsteer, anti-squat and camber curve back to normal range, providing better roll stiffness, better handling and grip.
Product Features:
- To suit Subaru Impreza WRX and WRX STI (1992 - 2013)
- Corrected roll centre
- Corrected camber curve
- Corrected anti-Squat
- Weight saving over OEM components
- High strength steel construction
-1 kg lighter over OEM knuckle / upright, but still maintaining required strength and stiffness
-50mm drop from the knuckle / upright, Rollcenter correction
2000 - 2007 WRX/STI 72x42x52 wheel bearing needs to be used, either 5x100 hub (28462FE001) or 5x114,3 hub (28462FE011) can be used. Both are for STI/WRX 72x42x52 wheel bearing
Brake caliper tabs moved to upright / knuckle, in OEM solution the rear brake caliper attached to the dust shield. Wisefab solution provides higher stiffness for brake caliper
OEM handbrake fitmet, OEM handbrake can be used, but the brake caliper tabs need to be removed for clearance
CrMo sphericals, Traction link bushing replaced with spherical bearing
- Napiši osvrt
Podaci
| Tip | Lock kit |
Nema odgovora?
Postavite pitanje Imate pitanje? Pronađite odgovor u raspravi.
| Marka | Model | Oznaka |
|---|---|---|
| Subaru | Impreza | G1 (1992 - 2000) |
| Subaru | Impreza | G2 (2000 - 2003) |
| Subaru | Impreza | G2 Facelift (2005 - 2007) |
Kategorije
Kako povećati performanse i pouzdanost jednog od najpopularnijih BMW motora?
Rastuće temperature donose priliku da svoj automobil pripremite za ljetnu sezonu. Što poboljšati i na što paziti?
Kategorije Proizvođači
Pregledani proizvodi
-
WISEFAB rear track kit...
Impreza is good performance car...
2025 race-shop
WATCHDOG_OK
