MTS fiksni sportski komplet ovjesa X SPORTLINE za Volkswagen GOLF VIII (CD1) 07/19 -, -/-

MTS Technik x Eibach Sportline Performance Suspension Kit je jednostavan, učinkovit i jeftin način za poboljšanje optike i upravljanja vašim automobilom. Svođenjem nagiba karoserije na minimum, uzrokovanog brzim kočenjem, brzim ubrzanjem i oštrim zavojima, poboljšavate stabilnost i posljedično povećavate sigurnost. Kombinacija skraćenih MTS Technik amortizera s Eibach Sportline spuštajućim oprugama probudit će sportski duh u svakom cestovnom automobilu.

Informacije o proizvodu:

• Prikladno za: Volkswagen GOLF VIII (CD1)
• Motor: 2.0 GTI, 2.0 TDI GTD
• Godina proizvodnje: 07/19 -
• TÜV certifikat: Da
• Maksimalno opterećenje na prednjoj osovini: -1110 kg
• Maksimalno opterećenje na stražnjoj osovini: -930 kg
• Spuštanje (prednja / stražnja osovina): - / -

Dodatne informacije:

E1 - If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products. The specifications indicated in the Components Certificate are for the classification of the item / vehicle. Please check the Tip Components Certificate number of your car and compare with the Components Certificate. (Letter "K" in your vehicle registration certificate or to find at the Tip plate of your car!). Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de. In case of non-conformance the items must not be fitted – please refer to your dealer. Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online. Mounting position - you can "read" the mounting position of the springs from the imprint - have them installed just the way you read the imprint. Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required. Here all wheel/tyre-combinations are possible, which are released by the wheel Tip testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required. Depending on Motor, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car. If your vehicle has serial electronic damper control this will not be available anymore while using the MTS Technik x Eibach suspension kit. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code., E18 - Without levelling control., E20 - Except vehicels with 4WD., 115 - Rear dampers only suitable for torsion-beam suspension., E170 - For cars with independent suspension at the rear axle., E318 - reduced lowering by approx. 15 mm with 19-inch original rims (with and without DCC)

Dodatne napomene: torsion beam