STRUČNI SAVJET
od 9 do 17 sati
Nema proizvoda
Besplatna dostava! Dostava
0,00 € Ukupno
Proizvod je uspješno dodan u vašu košaricu
( kom)
Kupite za više i isporuka koju imate besplatno.
*329 602
WISEFAB rear track kit for Honda S2000
Honda S2000 is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldn’t work as it supposed to. The kit would bring the RC, bump steer and camber gain back to normal range on lowered car, providing better roll stiffness, better handling and grip. It has over 40mm lower A-arm joint drop compare to original knuckle.
Novi proizvod
4.804,80 € s PDV-om
Privremeno nedostupno
U Skladištu: 0 kom
Nažalost, proizvod je privremeno nedostupan. Molimo odaberite drugi.
Za automatsko obavještavanje o dostupnosti proizvoda,
klik na "Obavijesti nakon dostupnosti proizvoda".
klik na "Obavijesti nakon dostupnosti proizvoda".
WFS21
Preporučeni proizvodi
Honda S2000 is a well designed car for enthusiast driver. The car performs well on streets and can be taken to a race track. If the focus is more towards performance, then the car can act even better with lowered ride height, but then the factory designed kinematics wouldn’t work as it supposed to. The kit would bring the RC, bump steer and camber gain back to normal range on lowered car, providing better roll stiffness, better handling and grip. It has over 40mm lower A-arm joint drop compare to original knuckle.
Product Features:
- To suit Honda S2000
- Corrected roll centre
- Corrected camber curve
- Corrected anti-Squat
- Weight saving over OEM components
- High strength steel construction
- Rod end/spherical joints, no rubber bushes
Weight reduction over original components and still maintaining required strength and stiffness
7075-T6 aluminium billet CNC knuckles and CrMo arms with optimized design and all double shear connections provide low weight and high strenght.
CrMo rod ends and sphericals used instead of rubber bushings
Easy camber adjustment on knuckle
Camber can be adjusted easily on trackside in a few minutes
Bump steer adjustment
Bumpsteer is adjustable by tie rod height on knuckle
Quicker steering ratio.
Steering ratio is slightly quicker compare to original
Other components, packaging and clearance.
This kit assumes coilovers
Minimum rim size is 17“
Track width is close to original, So similar size and offset rims can be used as with original suspension. We have tested 18x10 ET35, 275/35 R18 with wider fender flares
Original wheel speed sensor can be used
AP1 an AP2 generation compatibility
- Napiši osvrt
Podaci
| Tip | Lock kit |
Nema odgovora?
Postavite pitanje Imate pitanje? Pronađite odgovor u raspravi.
| Marka | Model | Oznaka |
|---|---|---|
| Honda | S2000 | AP (1999 - 2003) |
| Honda | S2000 | AP Facelift (2003 - 2009) |
Garrett Motion je globalni tehnološki lider u turbopunjenju, donoseći tehnologije razvijene u Formuli 1 jednosjedima ili klasičnim serijskim vozilima.
Kako poboljšati svoj automobil, a ne izgubiti tehničku dozvolu?
Jednostavne upute o tome kako opremiti unutrašnjost sportskim sjedalom.
Informacije i važni pojmovi koje bi svaki automobilski entuzijast trebao znati za pravi odabir kotača.
Kako osigurati čistoću i trajnost sportskih filtera?
Kako povećati performanse i pouzdanost jednog od najpopularnijih BMW motora?
Kategorije Proizvođači
Pregledani proizvodi
-
WISEFAB rear track kit...
Honda S2000 is a well designed car...
2025 race-shop
WATCHDOG_OK
