STRUČNI SAVJET
od 9 do 17 sati
Nema proizvoda
Besplatna dostava! Dostava
0,00 € Ukupno
Proizvod je uspješno dodan u vašu košaricu
( kom)
Kupite za više i isporuka koju imate besplatno.
*392 134
TWIN DISC CLUTCH SET FOR BMW M50/ M52/ M54/ S50/ S54 engine and M57/ M47N/ M3 E46 gearbox - STAGE 4
Set can handle up to ~1200-1400 Nm of torque for regular cars
Novi proizvod
M50/M57TDSTG4
Preporučeni proizvodi
Set can handle up to ~1200-1400 Nm of torque for regular cars
- Set consist of single mass twin disc clutch set, throwout bearing and all needed bolts (12.9 class)
- 100% CNC machined parts - MADE IN UE
- Precision machining and alignment assures precise fit
- MONOBLOCK single mass flywheel - weight ~ 6.4 kgs.
- Rotating assembly weight ~ 13.2 kgs. (flywheel + middle plate + pressure plate)
- Custom made and lightweight 240 mm 4 puck sintered clutch discs (MIBA sintered pads)
- Sachs Performance 883082001243 pressure plate without SAC system
- Heat-resistant CNC machined clutch discs spacer/middle plate
- Clutch sets are fully balanced - END TO END - flywheel + middle plate + pressure plate together in accordance to the G6.3 class and up to 8000 rpm. Each clutch set is delivered with unique balance protocol
- Thanks to ultimate design and quality of the middle plate it is not making any noises when you press the clutch pedal. It will also not get stuck when gets heat because it is not touching the flywheel anywhere
- Works and engages smooth like an OEM clutch set
- Fits to following BMW engines: M50, M52, M54, S50, S52, S54 with following transmissions:
- 5 speed N47M ZF gearbox - 28x35-10N spline shaft
- 6 speed S54B32 Getrag - 28x35-10N spline shaft
- 5 speed M57 - 28x35-10N spline shaft - Set will not fit to the lift version of M54B30 with 6 speed gearbox
- Set will not fit to the Getrag/ZF 5 speed gearboxes
- Perfect for high power turbocharged engines
- Set can handle up to ~1200-1400 Nm of torque for regular cars
- Set prepared for the most powerful professional drift and drag cars
- Professional installation is necessary + break-in procedure required - at least 1000 km or 5000 gear shifts
- Our flywheels always have got starter gear mounted on it (monoblock solution)
- All used parts are typical - it means that whole set can be cheaply and fast renewed
- Each product has been stress tested - because only power and quality matters.
- Napiši osvrt
Podaci
| Marka | BMW |
Nema odgovora?
Postavite pitanje Imate pitanje? Pronađite odgovor u raspravi.
Kategorije
Garrett Motion je globalni tehnološki lider u turbopunjenju, donoseći tehnologije razvijene u Formuli 1 jednosjedima ili klasičnim serijskim vozilima.
Kako poboljšati svoj automobil, a ne izgubiti tehničku dozvolu?
Jednostavne upute o tome kako opremiti unutrašnjost sportskim sjedalom.
Informacije i važni pojmovi koje bi svaki automobilski entuzijast trebao znati za pravi odabir kotača.
Kako osigurati čistoću i trajnost sportskih filtera?
Kako povećati performanse i pouzdanost jednog od najpopularnijih BMW motora?
Kategorije Proizvođači
Pregledani proizvodi
-
TWIN DISC CLUTCH SET...
Set can handle up to ~1200-1400 Nm of...
2025 race-shop
WATCHDOG_OK
